High-Temperature FDM

Print custom ducts, fixtures, housings and technical components in PEEK, PEI and other specialist polymers. Our in-house high-temperature FDM service combines material guidance with practical help getting your design into production.

✓
PEEK, PEI 9085, PEI 1010 and TPI
✓
Materials for demanding heat, chemicals and loads
✓
Flame-retardant options for specified applications
✓
Direct help from first part to repeat orders
Explore materials ↓
Material Evidence

Help choosing the specialist polymer

In-House Production

Direct technical coordination

Repeatable Setup

An accepted setup for repeat orders

High-performance materials, ready to explore

Explore specialist polymers for demanding parts. Choose a grade or ask our team to help with the material and manufacturing approach.

PEEK

3D4MAKERS

A high-performance polymer for custom adapters, equipment interfaces and components facing demanding heat and chemical exposure.

PEEK 3D4MAKERS material render of Flanged flow adapter, showing the printed surface and component geometry.View material →
PEI 1010

3D4MAKERS

Rigid, heat-resistant PEI for custom ducts, technical housings and equipment components.

PEI 1010 Ultem material render of Twin hose Y duct · integrated outlets, showing the printed surface and component geometry.View material →
PEI 9085

3D4MAKERS

Flame-retardant PEI for rigid ducts, housings and custom components where heat and fire performance matter.

PEI 9085 Ultem material render of Curved transition duct, showing the printed surface and component geometry.View material →
PPA-CF

Bambu Lab

Carbon-fibre reinforced PPA for rigid fixtures, locating tools and components exposed to demanding mechanical and thermal conditions.

PPA-CF Bambu Lab material render of Three-point fixture spider, showing the printed surface and component geometry.View material →
PPS-CF10

Polymaker

Carbon-fibre reinforced PPS for rigid fixtures and technical parts facing heat and chemical exposure.

PPS-CF10 Fiberon™ material render of Six-position sampling guide, showing the printed surface and component geometry.View material →
PPS-GF20

Polymaker

Glass-fibre reinforced PPS for rigid technical components where heat resistance, chemical exposure and electrical insulation matter.

PPS-GF20 Fiberon™ material render of Thermal probe guide flange, showing the printed surface and component geometry.View material →

Need help choosing, or looking for TPI or another specialist grade? Tell us about the part and we will discuss the options.

YOUR PART • OUR SUPPORT

Get help with your specialist part

Tell us where the part works and what it needs to do. We help choose the polymer and plan the print, including any project-specific documentation.

Discuss your application

Practical support from the first CAD model to the next batch.

From Material Choice to Repeatable Parts

Bring us the design and the job it needs to do. We connect specialist materials with an in-house manufacturing approach for your component.

CAD cutaway of a rectangular-to-round air duct, showing its locating lip, hollow wall section and bolted mounting interface. Numbered callouts explain the engineering details.

Select the material for the job

We help choose the grade around heat, loads and chemical contact. If the project has fire or industry requirements, we review the relevant material documentation with you.

✓
Mechanical, chemical and electrical needs
✓
Flame, smoke and thermal requirements
✓
Material guidance for your application

Engineer the production approach

Our team plans the build direction, wall structure and removable supports around the chosen polymer and how the part fits.

✓
Orientation and layer direction
✓
Fit and important dimensions
✓
Accessible support removal

Establish a repeatable setup

Try the first parts in the application. Once the design and setup are accepted, we keep them as the reference for future orders.

✓
First parts to try in your assembly
✓
A saved production reference
✓
Repeat orders with direct support

Select the material for the job

Every production batch follows the same validated manufacturing parameters to ensure consistent quality, repeatability, and predictable results across every order.

  • Validated profiles
  • Consistent batch quality
  • Repeatable production

Engineer the production approach

From material selection to design optimization, we support engineering teams in identifying the most effective manufacturing approach for performance, cost, and production efficiency.

  • Material guidance
  • Design optimization
  • Manufacturing support

Establish a repeatable setup

Our in-house production, digital inventory, and standardized workflows allow companies to move from prototype to recurring production without changing manufacturing partners.

  • In-house manufacturing
  • Digital inventory
  • Scalable production
Cutaway of actual FDM extrusion paths, showing walls, Grid infill and solid surfaces.
THE PRINTING GUIDE

Make better printing decisions.

Look inside the print. Compare infill, walls, layer heights and supports, then explore fit, surface finish, fastening and large-part assembly.

MATERIAL • APPLICATION • PROCESS

Choose the Polymer Around the Job.

Find the performance your application needs. We help you select the polymer and turn its material properties into a practical production plan.

Warm matte PEEK flow adapter with mounting base, rounded transitions and visible FDM extrusion layers.
Illustrative part and material appearance. Colour and finish vary by grade and process.
PEEK

For demanding mechanical and chemical environments.

PEEK brings mechanical strength and chemical resistance to functional components exposed to demanding environments. We plan the grade, build orientation and any annealing around your fluid exposure, mechanical loads and dimensional requirements.

Application examples
Fluid-handling adapters, equipment components and process tooling.
Our engineering support
We plan material conditioning, build orientation and dimensional checks around the component’s working environment.
Explore PEEK →

Need support with a specified standard? We help connect the material documentation, part design and production plan. Explore the grade-specific results below.

Documented performance.

Material data, interpreted for your application. We connect documented performance to the way your part is designed and produced.

PEI 9085

Flame & heat release

FAR 25.853
PASS60-second vertical burn · Type A · 2 mm
OSU heat-release limits
55 / 55Total ≤55 kW·min/m² at 2 min; peak ≤55 kW/m² in the 5-minute test.

EN 45545 R6-HL3Supplier-reported raw-material approval. We help match the report’s scope to your rail application.

View PEI 9085 source ↗

PEI 1010

Flame & smoke density

UL 94
V-0At 0.75 mm and above
UL 94
5VAAt 3.00 mm and above

ASTM E662 · Ds = 2 at 4 minFlaming smoke density. We review specimen thickness in the supporting report as part of application selection.

View PEI 1010 source ↗

Material expertise, from selection to production. We match the documented grade, colour and test conditions to your application and agree any component testing with you. Ratings shown apply to the stated material or test specimen; finished-part certification is a separate project requirement.

Plan your application with us →

APPLICATION EXAMPLES

Performance in real applications.

Custom ducts, production tooling and equipment components show what specialist polymers can make possible.

CAD illustration of a hollow rectangular-to-round transition duct with an offset outlet, six-hole flange, locating spigot and bolted mounting plate.

01 / AIR & TRANSPORT

Air ducts & transitions

Route air around equipment with a shaped duct, mounting flange and accessible connections.

What matters hereLow weight · Mounting loads · Flame and smoke requirements

CAD illustration of a stepped tubular workpiece held in two printed V-nests with bridge clamps, washers, studs and an axial locating stop.

02 / TOOLING & ASSEMBLY

Process tooling & fixtures

Locate and hold a workpiece during assembly or testing, with replaceable nests shaped around the component.

What matters hereStiffness · Sustained loads · Dimensional stability

CAD illustration of a hollow flanged fluid adapter on a mounting foot, with a separated sealing gasket and matching metal pipe flange.

03 / FLOW & CONNECTIONS

Fluid-handling adapters

Connect a custom passage to standard hardware, with surfaces designed to seal and space for maintenance.

What matters hereChemistry & pressure · Sealing · Leak testing

CAD illustration of an industrial electrical enclosure with a lifted lid, screw bosses, circuit board, mounting ears and two hexagonal cable glands.

04 / ELECTRICAL INTEGRATION

Electrical housings & carriers

Arrange boards, connectors and cable entries around the available space while keeping fasteners accessible.

What matters hereElectrical insulation · Flame behaviour · Local heat

REVIEW • SELECT • PRODUCE

Bring Your High-Performance Part Into Production

Send your CAD and tell us how the part will be used. We help with the specialist material and route to production.

Need a specialist grade or support with material selection? Our team is happy to help.