Current Material Studio render: amber PEI 1010 twin-hose Y duct.Grey SLS PA12 manifold isolated from the existing homepage illustration.Black BEDROCK 3D TPU 95A flexible cable bellows with visible FDM layers.Bambu Lab PPA-CF three-point fixture with raised mounting bosses and lightening openings.

Industrial 3D Printing

Get custom housings, fixtures, nylon components and flexible parts made with in-house FDM and SLS printing. Choose a material with our team, upload your CAD and order from one part to repeat batches.

✓
Functional prototypes and working parts
✓
Engineering, specialist and flexible materials
✓
Direct support from our production team
✓
From one part to repeat batches
FDM & SLS
Production

In-house production for functional parts

Certified
Materials

Engineering and flame-retardant options

Large-Format
Capability

Build volume up to 500 × 500 × 500 mm

Trusted by
Unilever logo.
UMC Utrecht logo.
TU Delft logo.
Qbuzz logo.
Sofis logo.
ZEISS logo.
Vebos logo.
Binfinity logo.

Production Technologies

We make both FDM and SLS parts in-house. Choose a broad material range with FDM or complex nylon geometry with SLS, with our team helping you decide.

FDM Production

Print housings, fixtures, brackets and larger components in a wide range of engineering, high-performance and flexible polymers.

SLS Production

Make complex PA12 nylon components without attached supports. SLS is a practical choice for intricate housings, clips, brackets and batches of smaller parts.

Industries We Serve

Custom parts for the equipment, vehicles and systems you build and maintain.

Materials for
Demanding Industrial Parts

Print housings, covers and technical components in polymers with flame-retardant, heat-resistant or electrical-insulation properties.
Our team helps choose the material and review any standards your project needs to meet.

Specialist materials. In-house production.

Bring us the application. We help connect the material, design and manufacturing approach, with manufacturer documentation available when your project requires it.

4

material capabilities to explore

EN 45545-2

R26 HL1–HL3 in PC/ABS FR TDS

UL 94 V-0

grade-specific flame ratings

Controlled

production profiles

EN 45545-2

PC/ABS FR offers a flame-retardant option for railway enquiries. Its TDS reports EN 45545-2:2016 R26 HL1–HL3 at 1.5 and 3.0 mm. We help review these results against your project requirements.

Materials:

Typical applications:

✓
railway interior parts
✓
equipment covers
✓
brackets

UL 94 V-0

Explore flame-retardant grades for housings, covers and technical parts. Our team can help with the grade choice and the reported UL 94 V-0 test conditions.

Typical applications:

✓
electrical housings
✓
machine covers
✓
technical brackets

Electrical Insulation

Explore materials with electrical-insulation data for technical components. Tell us what the part needs to do; we can review insulation or any separate static-control requirement with you.

Typical applications:

✓
electronics fixtures
✓
assembly aids
✓
component trays

Glow-Wire Results

For electrical projects with glow-wire requirements, we help review the available PC/ABS FR and PEI 1010 data against the specified test.

Typical applications:

✓
electrical enclosures
✓
control box parts
✓
protective covers

From Design to Production —
One Manufacturing Partner

Work directly with the team making your parts. We support material selection, design development, in-house FDM and SLS printing, and the next production batch.

Prototype. Test. Refine.

Turn design questions into physical parts before committing to production.

Resolve design questions before production.

Functional prototypes help you check fit, test assemblies and refine details. Work with our team on the material and manufacturing route for your next iteration.

Discuss your prototype
Three enclosure prototypes with mounting bosses, openings and printed layer texture.
01 · PROTOTYPE

Make it tangible

Check the fit, handling and connections with a physical part.

02 · TEST

Validate the assembly

Test mounting points, clearances and how components work together.

03 · REFINE

Improve the next iteration

Use your test findings to revise the design before moving into production.

Have a CAD file ready?

Upload & get a quote

The right material. The right process.

Find the material that suits the job. Explore tough housings, rigid tooling, heat-resistant components and flexible parts with help from our team.

Flame retardancy

Flame-retardant options with supporting data

Illustrative render of a printed electrical enclosure with a separate lid.Application example

Electrical housings

High-temperature use

Materials for heat and mechanical loads

Illustrative render of an amber reinforced fixture bracket.Application example

Heat-exposed components

Complex geometry

Choose FDM or SLS for your part

Illustrative render of an SLS manifold with complex integrated geometry.Application example

Complex functional parts

Flexibility

Tune flexible parts around their use

Illustrative render of a flexible bellows protector.Application example

Flexible protective parts

Surface finish

+ Vapor smoothing · Explore surface finish options

Illustrative render comparing matte and satin surface finishes on matching covers.Application example

Visible covers & housings

Need a particular material property or project standard? We help review the grade and the manufacturing approach.

From first part to repeat production.

Try the first part, refine the design and order the next batch. Save the accepted version in Digital Inventory for easier reordering.

01 · APPROVE

Approve your part

Flexible bellows protector.

We help finalise the material and print approach around your part.

02 · PRODUCE

Produce your batch

Our team prepares, prints and checks the parts in-house.

03 · SAVE & REPEAT

Save & reorder

Digital Inventory
Flexible bellows protector shown in Digital Inventory.
Your approved part
CAD file
Material + technology
Saved manufacturing settings

Save the accepted design and production setup for the next order.

A digital inventory. Parts when you need them.

Find your saved part and reorder without starting the enquiry again.

Open customer portal
Bridge production

Parts while your next manufacturing route is prepared.

Production batches

A defined quantity for your project.

Recurring manufacturing

Repeat supply of approved parts.

Spare & replacement parts

Produce replacement parts when needed.

Illustrative part and batch visuals. Manufacturing requirements are agreed for each project.

Improve the part. Simplify production.

Make your design work for 3D printing.

Start with the manufacturing challenge.

Show us how the part fits and works. We help with features that affect printing, assembly and everyday use.

Explore the processFDMSLS
Example of a complex printed manifold with integrated passages and reinforcing features.
Current design challengeOptimization routeWhat it can improve

Separate parts and fasteners

Consolidate the assembly

Integrate compatible features into one printable component.

Fewer parts to source, assemble and manage.

Material where it adds little value

Reduce weight

Refine walls, ribs and geometry around the required loads.

Less material while targeting the required performance.

Geometry that complicates printing

Design for the process

Plan the build direction and space between moving or assembled parts

A design better suited to FDM or SLS production.

Repeated manual production steps

Simplify the workflow

Choose the finish and simplify assembly

Fewer avoidable steps in recurring production.

Bring your CAD and tell us what you want to improve

Discuss design optimization
A crisp silver highlight across a curved brushed aluminium surface.
Adopt • Validate • Produce • Repeat

Bring the part and the problem.

A useful enquiry starts with the CAD, quantity and what the part needs to do. Show the mating components, important fits and the date you need it.

Still developing the design? Send a drawing or photo and explain the installation. We can discuss the next step before you choose a material or place an order.

Materials for
Every Industrial Application

Find materials for tough housings, production fixtures, demanding heat and flexible components. Explore the range or ask our team to help choose.

Engineering Materials

Make functional prototypes, tough housings, brackets and production tools with ASA, PC, reinforced polymers and SLS PA12.

View engineering materials →

High-Performance Materials

Make custom parts for demanding heat, chemical contact and mechanical loads with PEEK, PEI and reinforced PPS.

View high-performance materials →

Certified Materials

Explore PC/ABS FR and PEI 9085 for housings, covers and ducts with fire-performance requirements. We help review the material documentation and your component.

View certified materials →

Customer experiences

What our customers say.

From material advice to the finished part, hear from the teams we work with.

Sobolt
“We chose GAGAT AM after comparing several 3D printing companies in the Netherlands and abroad. Their quality, service and speed are superior.”
Michael SpeekProduct & data project developer · SoboltTranslated from Dutch
SOFIS
“GAGAT AM has supported us as a fantastic alternative 3D printed part supplier where we have faced challenges with our traditional supply chains during the Corona period.”
Jack BennetOperation manager · SOFIS BV
DiManEx
“GAGAT AM has consistently delivered on their promise of excellence, making them an invaluable partner for us.”
Michel KokkelkorenBusiness development · DiManEx

Your Digital Manufacturing Workspace

Quote a new part, follow an order and reorder a saved design from one customer workspace.

Why Companies Stay With Us

Work directly with the team making your parts. Get practical advice, an in-house production route and a simpler way to order again.

Illustration of two engineering partners reviewing a batch of enclosure housings and assorted sample parts at a desk.

Reliable Production

We retain the accepted material and manufacturing setup as the reference for repeat batches, with agreed checks for your component.

✓
Validated profiles
✓
Agreed checks for your parts
✓
Repeatable production

Engineering Partnership

Get help choosing a material and preparing the design for printing. We work through the fit, features and production approach with you.

✓
Material guidance
✓
Design optimization
✓
Manufacturing support

Built for Long-Term Manufacturing

Move from first prototypes to recurring orders with the same production team. Saved designs and production details make the next batch easier to arrange.

✓
In-house manufacturing
✓
Digital inventory
✓
Scalable production

Reliable Production

Every production batch follows the same validated manufacturing parameters to ensure consistent quality, repeatability, and predictable results across every order.

  • Validated profiles
  • Consistent batch quality
  • Repeatable production

Engineering Partnership

From material selection to design optimization, we support engineering teams in identifying the most effective manufacturing approach for performance, cost, and production efficiency.

  • Material guidance
  • Design optimization
  • Manufacturing support

Built for Long-Term Manufacturing

Our in-house production, digital inventory, and standardized workflows allow companies to move from prototype to recurring production without changing manufacturing partners.

  • In-house manufacturing
  • Digital inventory
  • Scalable production

In-House Production Capacity

Production parts per month
15,000
In-house production machines
50
AM Materials
25+
UPLOAD • CONFIGURE • PRODUCE

Ready to make your part?

Upload CAD, choose the material and quantity, and get a quote online.

Need help choosing a material or preparing your part? Talk to our team.