PEI 9085 Ultem material render of Curved transition duct, showing the printed surface and component geometry.PC/ABS FR BEDROCK 3D material render of Control module mounting bezel, showing the printed surface and component geometry.

Certified Materials

Flame-retardant materials for your next part.

Get custom housings, covers, ducts and equipment components printed in PC/ABS FR, PC-FR V0 or PEI 9085. Our team helps you choose the material and work through the relevant fire-performance requirements, from the first part to repeat orders.

  • PC/ABS FR, PC-FR V0 and PEI 9085 parts, printed in-house
  • Custom components for transport and equipment projects
  • Help with material choice and project requirements

Certified material options

Explore flame-retardant PC/ABS and PC for technical housings and covers, or PEI 9085 for rigid, heat-resistant components. Our team can help choose the grade for your part.

PC/ABS FR

BEDROCK 3D

A flame-retardant PC/ABS blend for custom control bezels, electrical housings and equipment covers.

PC/ABS FR BEDROCK 3D material renderView material →
PEI 9085

3D4MAKERS

Flame-retardant PEI for rigid ducts, housings and custom components where heat and fire performance matter.

PEI 9085 Ultem material renderView material →
PC-FR V0

Extrudr

Flame-retardant PC for custom electrical housings, covers and equipment components where toughness and heat resistance matter.

White PC-FR V0 harness separation saddleView material →

Not sure which material to choose? Tell us what your part needs to do. Our team can help, and each material page has the detailed properties.

Documented grades. Clear requirements.

Our materials come with manufacturer documentation. We help you work through the relevant requirements and choose a production route for your component. Have a project specification? Send it with your enquiry.

FAR 25.853

PEI 9085 TDS results

Grade-specific

test conditions

UL 94 V-0

flame-retardant grades

Controlled

repeatable FDM production

RAILWAY · EN 45545-2

PC/ABS FR: R26 · HL1, HL2 and HL3
Manufacturer TDS: 1.5 and 3.0 mm specimens, EN 45545-2:2016.

View manufacturer evidence →

RAILWAY · PEI 9085

R6 · HL3 — raw-material reference
Supplier statement for ULTEM 9085 raw material. Our team can help review the documentation needed for your printed component.

View supplier reference →

MATERIALS FOR YOUR COMPONENT

Two featured options. Practical possibilities.

Make custom housings, covers, ducts and equipment parts in these specialist materials. Explore each grade for available colours, finishing options and detailed properties.

PC/ABS FR · BEDROCK 3D

Technical and electrical housings.

A halogen-free, flame-retardant PC/ABS blend for custom covers, control bezels and equipment housings. Its combination of properties makes it useful for technical and electrical components.

R26 · HL1 / HL2 / HL3

EN 45545-2:2016 · 1.5 and 3.0 mm

UL 94 V-0 · 1.5 and 3.0 mm

PEI 9085 · ULTEM

Heat-resistant technical components.

Print rigid ducts, housings and custom equipment connections in heat-resistant PEI 9085. A tailored shape helps the component fit the available space and surrounding assembly.

R6 · HL3

EN 45545 · supplier reference for the raw material

FAR 25.853 · results in the grade’s TDS

These references have different scopes. A raw-material approval and a printed-specimen result are not interchangeable. Neither automatically approves the finished component.

TRANSPORT APPLICATIONS

Railway and aviation.
Custom parts for the interior.

From a camera housing to a cabin trim panel, custom geometry helps a component fit the installation. These application concepts show where our printing and material support can help.

Illustrative PC/ABS FR camera enclosure inside a train vestibule, with a blue pointer and magnified ceiling detail.

RAILWAY · EN 45545

A housing shaped around the installation.

A ceiling-mounted camera enclosure can follow the available space, cable route and mounting points. We help plan the printable housing and review PC/ABS FR against the project’s railway requirements.

Explore railway applications →
Original concept illustration of a custom PEI 9085 cabin infill panel beside overhead luggage bins, with a blue pointer and interior detail.

AVIATION · FAR 25.853

A small panel. A precise cabin fit.

A custom infill panel closes the gap between an overhead luggage bin and the surrounding trim. PEI 9085 is an option to discuss for this rigid, heat-resistant component. We help plan the geometry and manufacturing approach alongside the installation requirements.

Explore PEI 9085 →

RAILWAY FIRE REQUIREMENTS

Help with railway material requirements.

Share the project specification if you have one. We help interpret the material results and identify the documentation relevant to your component.

PC/ABS FR · documented example

EN 45545-2Standard · 2016 reference
R26Requirement set
HL1–HL3Reported hazard levels
1.5 / 3.0 mmReported specimen thicknesses
Explore railway applications →
01

We review where the part is used.

The component’s location and function guide the requirement set. The PC/ABS FR result shown here covers R26; our team can help check whether that matches your project.

02

We check the required classification.

The required hazard level is considered together with the requirement set. We help connect the project specification to the relevant material documentation.

03

We explain the scope of the data.

Our team reviews grade, colour, specimen conditions and manufacturing method. The PEI 9085 R6-HL3 supplier statement concerns raw material; any additional printed-part evidence is reviewed for the project.

FROM YOUR DESIGN TO PRINTED PARTS

We help get your component into production.

Bring your design and tell us what it needs to do. We help with the material choice, manufacturing approach and any project-specific documentation.

YOUR PART, OUR PRODUCTION PLAN

ComponentFunction & location
EvidenceStandard · R-set · HL
GeometryWalls · connections · fit
AcceptanceTests & inspection

Start with the part you need.

Send the CAD or drawing and explain where the component will be used. Include any specification you already have; our team will help with the material and next steps.

  • Help selecting material and colour
  • Support with relevant material documentation
  • A clear route to the first printed parts
01Agreed setupGrade · orientation · settings
↓
02First-part reviewDimensions · function · evidence
↓
03Repeat orderKeep the accepted design available

Make the next order straightforward.

We retain the accepted design and manufacturing setup for future orders. If the part or its use changes, our team helps review what needs to change with it.

  • Material preparation and build setup handled by our team
  • First parts for fit and function checks
  • Support for repeat orders and design revisions

MATCH THE REQUIREMENT

More materials. More possibilities.

Explore engineering grades for working housings and fixtures, or specialist polymers for demanding heat and chemical exposure.

Engineering Materials

Make functional housings, brackets and fixtures in PC, ASA, reinforced polymers or SLS PA12, with help choosing a grade for your application.

Explore engineering materials →

High-Performance Materials

Explore PEEK, PEI 1010, reinforced PPS and PPA-CF for custom parts facing demanding heat, chemical exposure or mechanical loads.

Explore high-performance materials →

LET’S MAKE YOUR NEXT COMPONENT

01Tell us what you need
02We help choose the material
03Get your parts printed

Bring your design.
We’ll help get it made.

Upload your CAD for a quote or tell us about the component. Add any project specification you already have, and our team will help with the next steps.