ASA BEDROCK 3D material render of Outdoor sensor sun hood, showing the printed surface and component geometry.

ASA

Print outdoor covers, sensor housings and equipment parts in BEDROCK 3D ASA. Its UV and weather resistance make it a useful choice for exposed installations, with our team helping plan the shape, fixings and finish.

✓
UV and weather resistance
✓
Outdoor covers and housings
✓
Rigid equipment components
✓
Custom mounting geometry
Technology

FDM

Post-processing
Tapping (internal threads)
Textured surface (fuzzy skin)
Heat-set threaded inserts
Support removal
Colours

BEDROCK 3D

Material overview

ASA is a useful starting point for a functional part that will spend time outdoors. BEDROCK 3D ASA combines a rigid engineering-polymer character with manufacturer-reported UV and weather resistance.

Why choose ASA?

Typical projects include sensor covers, exterior equipment housings and custom mounting pieces. We plan the component around its installation, including sun exposure, drainage and access for fixing it in place. For a sealed enclosure, we also discuss the joints and checks needed for the complete assembly.

Typical applications

Sensor hoods

Shelter equipment while leaving its sensing area and cable route clear.

Exterior covers

Fit a protective cover around existing controls or mechanisms.

Outdoor mounting parts

Add custom brackets and interfaces around an exposed installation.

Black ASA sensor weather hood with a sheltered equipment opening and accessible slotted mounting backplate.

Keep the sensor accessible outdoors.

The illustrated hood shades and shelters equipment while leaving the sensing area clear. ASA addresses the weather-exposure side of the choice; the overhang, mounting slots and open lower edge address installation and drainage.

Best suited to

Outdoor hoods, covers and equipment components exposed to sunlight and weather.

What to consider

A weather-resistant polymer does not make the assembled housing sealed or IP-rated.

Make the first sample useful

Keep the sensing path unobstructed, provide a route for water and leave room for cable bends and mounting tools.

Weather resistance belongs in the design too.

The sectional hood illustrates a sheltered opening and an open underside. ASA provides a useful material starting point for outdoor use; the complete cover still needs to manage water, sun and its fixings.

Allow for sun and heat

Dark surfaces can become hot in direct sunlight. We consider colour, exposure and any heat coming from the equipment.

Support the mounting points

Ribs and broad contact areas help carry the cover without relying on thin unsupported tabs.

Distinguish a hood from a sealed enclosure

A rain cover does not establish an IP rating. If the equipment must exclude water or dust, we help plan the joints, seals and verification needed.

Explore the Printing Guide →

Sectional CAD illustration of an ASA weather hood showing its sloped roof, open underside and sheltered sensor space.

Order your BEDROCK 3D ASA part.

Send the design and quantity

Send the sensor envelope and mounting drawing. Show the installed orientation, cable route and areas that must remain open for sensing or drainage. No usable CAD yet? Send a drawing or photo to discuss the next step.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online and tell us when you need the parts. We review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Available options include tapped internal threads, textured walls (fuzzy skin), heat-set threaded inserts, where the design allows. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed. Choose from the colours shown for this material when quoting.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: BEDROCK 3D ASA manufacturer technical data. BEDROCK 3D reports UV and weather resistance for this ASA grade. The technical sheet includes specimen preparation and conditioning; these data do not establish an IP rating for a printed enclosure. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

XY: 34.6 MPa; ZX: 12.0 MPa — ISO 527; conditioned 72 h at 23°C / 50% RH

Tensile modulus

XY: 1828 MPa; ZX: 1400 MPa — ISO 527; conditioned 72 h at 23°C / 50% RH

Elongation at break

XY: 4.5%; ZX: 1.0% — ISO 527; conditioned 72 h at 23°C / 50% RH

Heat deflection temperature

92°C at 1.8 MPa; 101°C at 0.45 MPa — ISO 75-2

Density

1.073 g/cm³ — ISO 1183-1; filament density

Compare ASA with other materials.

Compare ABS for sheltered installations and PETG for everyday prototypes. Review PC if heat or impact is the dominant requirement rather than weathering.

ABS

For sheltered equipment housings where weathering is less important.

PETG

For everyday functional prototypes and covers.

PolyMax PC

For a tougher polycarbonate option when heat and impact lead the decision.

BEDROCK 3D ASA 3D printing questions.

Why choose ASA instead of ABS outdoors?

ASA is formulated for UV and weather resistance, making it a more deliberate choice for sun-exposed parts. We still consider temperature, loads and the intended life of the component.

Does ASA make an enclosure waterproof?

No. Water resistance of the polymer does not establish a sealed assembly. Openings, joints, print structure and seals all matter if an IP rating or leak performance is required.

Can ASA parts be used in direct sun?

It is a material to consider for that use. Surface colour, local temperature and mechanical loading still affect the design, especially for thin covers or continuously loaded brackets.

Upload your CAD and get a quote, or talk to our team about the application.