Grey PA6-GF25 FDM motor mounting bracket with an open circular flange, accessible bolt holes and reinforcing ribs.

PA6-GF25

Make rigid nylon brackets, fixture bodies and equipment supports in Polymaker Fiberon PA6-GF25. Our in-house FDM team helps plan this glass-fibre-reinforced grade around the application and final fit.

✓
25% glass-fibre reinforcement
✓
Rigid nylon working parts
✓
Custom brackets and fixture bodies
✓
Moisture and fit planning
Technology

FDM

Colours

Polymaker

Material overview

Fiberon PA6-GF25 is a PA6 nylon grade reinforced with 25% glass fibre. It offers another route to rigid equipment parts and tooling, with a different reinforcement system from the carbon-filled nylons.

Why choose PA6-GF25?

As with other PA6 grades, moisture conditioning matters to the mechanical response and dimensions. We help select the material condition, build direction and production approach around the component rather than choosing from a single dry-state number.

Typical applications

Equipment supports

Create a rigid support around the available mounting points.

Fixture bodies

Combine locating features and accessible attachment holes in one part.

Functional brackets

Develop a reinforced mounting component for a working assembly.

Charcoal fibre-reinforced polymer locating fixture supporting a stepped metal workpiece in shaped seats, with an end stop and open mounting holes.

Make a fixture that follows the workpiece.

A shaped nest can position a component for assembly, inspection or handling. The illustrated fixture combines contact seats, an end stop and mounting holes in one printed body, leaving the workpiece accessible.

Locate the features that matter

Build the contact surfaces around the part being held, with clearance for loading and removal.

Add stiffness where it helps

Ribs and a supported base can reduce unwanted movement without filling every space with material.

Fit your workflow

Include access for tools and inspection. If the operation applies cutting or clamping forces, we review the retention method separately.

PA6-GF25 gives the fixture designer a glass-reinforced nylon alternative while keeping the contact surfaces and mounting details custom to the job.

Material stiffness starts with a sensible structure.

The bracket comparison shows how supporting ribs change the way a corner carries load. Fibre reinforcement helps the material resist deformation, but it does not replace a well-supported shape.

Match the build to the load

We plan print orientation around the forces at the mounting points. Strength across layers differs from strength along the printed paths.

Protect contact and fixing areas

Leave useful material around holes and spread clamping pressure where needed. A fibre-filled surface may mark a delicate workpiece; a replaceable contact pad can help.

Plan heat treatment and fit together

If annealing is part of the agreed process, we consider its effect on dimensions before final fit checks. The first fixture establishes the reference for repeat orders.

Explore the Printing Guide →

Two charcoal FDM brackets showing an unreinforced corner and the same bracket with supporting ribs and accessible mounting holes.

Order your Fiberon PA6-GF25 part.

Send the design and quantity

Upload your CAD file and choose the material and quantity. Add a drawing or note for important dimensions, connections and visible surfaces. If you are still choosing a grade, our team can help before you order.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online; we review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Contact us to confirm the available colour and finishing options for this grade. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: Fiberon PA6-GF25 manufacturer technical data. Polymaker PA6-GF25 specimens were annealed at 100°C for 16 hours. Dry and wet data are separate. Glass-fibre reinforcement does not itself establish an electrical or flame rating. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

X–Y: 80.1 ± 1.8 MPa; Z: 60.7 ± 1.1 MPa — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Tensile modulus

X–Y: 5356.9 ± 211.0 MPa; Z: 3375.9 ± 142.1 MPa — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Elongation at break

X–Y: 2.4 ± 0.2%; Z: 4.0 ± 0.4% — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Heat deflection temperature

157°C at 1.8 MPa; 191°C at 0.45 MPa — ISO 75; annealed 100°C / 16 h

Density

1.20 g/cm³ at 23°C — ISO 1183 / GB/T 1033; material density

Material performance and test data

  • Flame classification: UL 94 HB at 1.5 mm.
  • Surface resistivity: >10¹² Ω (OL), ANSI ESD S11.11.
  • Test condition: specimens annealed at 100°C for 16 hours; dry and wet results are reported separately.

Compare PA6-GF25 with other materials.

Choose around what the component needs to do. These alternatives offer different starting points; our team can help narrow the choice.

PA6-CF20

Compare carbon reinforcement in a PA6 grade.

PPS-GF20

For a glass-reinforced PPS option with different heat and chemical behaviour.

SLS PA12

For complex unfilled nylon components without attached supports.

Fiberon PA6-GF25 3D printing questions.

Is glass fibre better than carbon fibre?

It depends on the grade and the job. Reinforcement changes stiffness, weight, surface and cost; compare the complete material data and the component rather than the fibre name alone.

Is PA6-GF25 automatically an electrical-insulation material?

No electrical rating follows from glass fibre alone. The required behaviour must be checked against the exact grade and the finished assembly. We can compare PPS-GF20 where its documented properties are relevant.

What should I know about moisture and finishing?

PA6 moisture uptake can affect fit and stiffness. We plan important dimensions around the use conditions; available colours and finishing are confirmed for the selected material before ordering.

Can I order one part and repeat it later?

Yes. Start with a single component or a batch. Once the design, material and production setup are accepted, we retain the agreed details to make the next order easier.

Upload your CAD and get a quote, or talk to our team about the application.