PC/ABS FR BEDROCK 3D material render of Control module mounting bezel, showing the printed surface and component geometry.

PC/ABS FR

Print custom electrical housings, control bezels and technical covers in BEDROCK 3D PC/ABS FR. This halogen-free flame-retardant blend comes with manufacturer fire-performance data and practical support from our in-house team.

✓
Halogen-free flame-retardant blend
✓
Electrical housings and covers
✓
Documented UL 94 V-0 results
✓
Custom parts with direct support
Technology

FDM

Post-processing
Tapping (internal threads)
Textured surface (fuzzy skin)
Heat-set threaded inserts
Support removal
Colours

BEDROCK 3D

Material overview

PC/ABS FR combines a practical housing material with a halogen-free flame-retardant formulation. It is a useful option for control bezels, covers and electrical equipment parts where fire behaviour is part of the design brief.

Why choose PC/ABS FR?

BEDROCK 3D provides UL 94, railway and glow-wire results for this grade. We help connect that information to the proposed part and production approach, while keeping the geometry useful for assembly and maintenance.

Typical applications

Control bezels

Fit displays and controls into a custom front panel with accessible fixings.

Electrical equipment covers

Protect components while preserving cable routes and service access.

Railway project components

Review custom parts against the specific installation and requirement set.

Charcoal flame-retardant polymer control enclosure concept with a separate bezel, display and aligned corner fixing holes.

Fit the control panel to the installation.

The illustrated bezel brings the display opening and accessible fixings into a custom housing. PC/ABS FR is a candidate when that practical fit must be considered alongside the grade’s documented flame, railway or glow-wire results.

Best suited to

Compact control bezels and equipment covers with a specified fire-performance brief.

What to consider

The published R26 result has a defined scope. It is not a substitute for a different requirement set or approval of the complete component.

Make the first sample useful

Identify the installed location, wall sections and required evidence. Check that display servicing and cable access remain possible after mounting.

Keep the useful details and the material requirements together.

The cutaway shows a supported fixing boss and ribs within an enclosure corner. A fire-performance material still needs a sound mechanical design, usable wall sections and a sensible production approach.

Let us review the wall structure

We check the proposed geometry against the relevant material information and the way the part will be printed. You do not need to turn a data sheet into a print specification yourself.

Plan openings and connections

Cable entries, ventilation, joints and fasteners affect the finished enclosure. We help keep these features practical to print and assemble.

Agree what the finished part must meet

Material ratings help selection. Any approval or test required for the complete component is agreed around the actual installation.

Explore the Printing Guide →

CAD section of a charcoal enclosure corner with an integral fixing boss, reinforcing ribs and a separate mounting ear.

Order your BEDROCK 3D PC/ABS FR part.

Send the design and quantity

Include the mounting opening, display drawing and project specification. Tell us which surfaces locate the bezel and what documentation the installation requires. Discuss your requirements if the specification needs review.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online and tell us when you need the parts. We review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Available options include tapped internal threads, textured walls (fuzzy skin), heat-set threaded inserts, where the design allows. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed. Choose from the colours shown for this material when quoting.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: BEDROCK 3D PC/ABS FR manufacturer technical data. BEDROCK 3D reports EN 45545-2:2016 R26 HL1–HL3 and UL 94 V-0 at 1.5 and 3.0 mm. Glow-wire results are 725°C at 1.5 mm and 960°C at 3.0 mm under IEC 60695-2-11. Results apply to the stated specimens and do not alone approve a finished component. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

XY: 50.1 MPa; ZX: 17.3 MPa — ISO 527; conditioned 72 h at 23°C / 50% RH

Tensile modulus

XY: 2545 MPa; ZX: 2188 MPa — ISO 527; conditioned 72 h at 23°C / 50% RH

Elongation at break

XY: 10.7%; ZX: 0.8% — ISO 527; conditioned 72 h at 23°C / 50% RH

Heat deflection temperature

81°C at 1.8 MPa; 89°C at 0.45 MPa — ISO 75-2

Density

1.193 g/cm³ — ISO 1183-1; filament density

Material performance and test data

  • Railway fire performance: EN 45545-2:2016, R26 HL1–HL3 at 1.5 mm and 3.0 mm.
  • Flame rating: UL 94 V-0 at 1.5 mm and 3.0 mm.
  • Glow-wire test: IEC 60695-2-11, 725°C at 1.5 mm and 960°C at 3.0 mm.
  • Formulation: halogen-free flame retardant.

Compare PC/ABS FR with other materials.

Compare PC-FR V0 using its own test scope. Consider PEI 9085 for a different heat/fire-performance combination, or ordinary ABS when no flame requirement applies.

PC-FR V0

Compare a flame-retardant PC grade with R22/R23/R24 railway results.

PEI 9085

For a specialist PEI option with heat and fire-performance data.

ABS

For ordinary tough housings without a specified flame requirement.

BEDROCK 3D PC/ABS FR 3D printing questions.

What does the railway result cover?

The TDS reports EN 45545-2:2016 R26 at HL1, HL2 and HL3 for 1.5 and 3.0 mm specimens. That result does not establish R1, R6, R22 or R23 performance. We help identify the evidence relevant to the proposed installation.

Does halogen-free mean fireproof?

No. Halogen-free describes the formulation, and flame-retardant describes behaviour under stated test conditions. Neither makes a component non-combustible or automatically approved for an installation.

Do I need to choose wall thickness before contacting you?

No. Send the design or explain the component and its requirements. We can review the proposed walls, manufacturing route and supporting data with you.

Upload your CAD and get a quote, or talk to our team about the application.