PPS-CF10 Fiberon™ material render of Six-position sampling guide, showing the printed surface and component geometry.

PPS-CF10

Print stiff fixtures, mounting parts and equipment components in Polymaker Fiberon PPS-CF10. We help apply this carbon-fibre-reinforced PPS grade to projects involving demanding heat, chemicals and dimensional requirements.

✓
10% carbon-fibre reinforcement
✓
Stiff technical components
✓
Low moisture sensitivity
✓
PPS heat and chemical resistance
Technology

FDM

Post-processing
Heat-set threaded inserts
Support removal
Colours

Polymaker

Material overview

Fiberon PPS-CF10 reinforces PPS with 10% carbon fibre for rigid technical components. Its low moisture sensitivity and chemical resistance make it worth comparing for fixtures and equipment interfaces used in demanding environments.

Why choose PPS-CF10?

The high thermal values are tied to the manufacturer’s specimen condition and load. We help choose a useful production condition, plan annealing where agreed and check the dimensions that matter to the assembly.

Typical applications

Demanding process fixtures

Locate a workpiece where the environment calls for a specialist polymer.

Equipment mounting parts

Create stiff brackets and interfaces with supported attachment features.

Chemical-exposed tooling

Compare PPS against the actual fluid, temperature and duration of contact.

Charcoal fibre-reinforced polymer locating fixture supporting a stepped metal workpiece in shaped seats, with an end stop and open mounting holes.

Plan the fixture around its exposure.

A shaped nest can locate a component during a process or inspection, but its working environment may rule out an ordinary tooling polymer. The illustrated seats and end stop show where heat, fluids and contact loads need to be considered.

Best suited to

Rigid tooling and equipment interfaces where heat or chemical exposure is central to the selection.

What to consider

Chemical resistance depends on the substance and conditions. Published thermal values also depend on load and specimen treatment.

Make the first sample useful

Identify the chemicals, concentration, contact duration and temperature. Keep the workpiece accessible and agree checks for the contact seats after any annealing.

Material stiffness starts with a sensible structure.

The bracket comparison shows how supporting ribs change the way a corner carries load. Fibre reinforcement helps the material resist deformation, but it does not replace a well-supported shape.

Match the build to the load

We plan print orientation around the forces at the mounting points. Strength across layers differs from strength along the printed paths.

Protect contact and fixing areas

Leave useful material around holes and spread clamping pressure where needed. A fibre-filled surface may mark a delicate workpiece; a replaceable contact pad can help.

Plan heat treatment and fit together

If annealing is part of the agreed process, we consider its effect on dimensions before final fit checks. The first fixture establishes the reference for repeat orders.

Explore the Printing Guide →

Two charcoal FDM brackets showing an unreinforced corner and the same bracket with supporting ribs and accessible mounting holes.

Order your Fiberon PPS-CF10 part.

Send the design and quantity

Include the exposure details and workpiece drawing with your CAD. Mark the locating faces and describe cleaning between uses. No usable CAD yet? Send a drawing or photo to discuss the next step.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online and tell us when you need the parts. We review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Available options include heat-set threaded inserts, where the design allows. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed. Choose from the colours shown for this material when quoting.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: Fiberon PPS-CF10 manufacturer technical data. Polymaker PPS-CF10 results use specimens annealed at 125°C for 16 hours. UL 94 V-0 is reported at 1.5 mm. The stated surface resistivity does not establish ESD-safe performance. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

X–Y: 59.4 ± 1.3 MPa; Z: 32.0 ± 5.1 MPa — ISO 527 / GB/T 1040; annealed 125°C / 16 h

Tensile modulus

X–Y: 5446.7 ± 149.0 MPa; Z: 2790.0 ± 152.6 MPa — ISO 527 / GB/T 1040; annealed 125°C / 16 h

Elongation at break

X–Y: 1.4 ± 0.1%; Z: 1.6 ± 0.2% — ISO 527 / GB/T 1040; annealed 125°C / 16 h

Heat deflection temperature

133°C at 1.8 MPa; 252.5°C at 0.45 MPa — ISO 75; annealed 125°C / 16 h

Density

1.29 g/cm³ at 23°C — ISO 1183 / GB/T 1033; material density

Material performance and test data

  • Flame rating: UL 94 V-0 at 1.5 mm.
  • Chemical resistance: reported by the manufacturer; confirm compatibility for the intended exposure.
  • Surface resistivity: >10¹² Ω (OL), ANSI ESD S11.11; this does not establish ESD-safe performance.
  • Test condition: all specimens annealed at 125°C for 16 hours.

Compare PPS-CF10 with other materials.

Compare PET-CF17 for less demanding tooling conditions. Consider PPS-GF20 when electrical-insulation data matters, or PEEK for a different specialist polymer.

PPS-GF20

Compare glass reinforcement and its electrical-insulation data.

PET-CF17

For a stiff reinforced tooling option under less demanding conditions.

PEEK

For another specialist polymer when the application warrants it.

Fiberon PPS-CF10 3D printing questions.

Does carbon fibre make PPS-CF10 ESD-safe?

No. The TDS reports surface resistivity above 10¹² ohms. Carbon reinforcement does not by itself establish static-dissipative or conductive behaviour.

Can I use the highest HDT as the operating temperature?

No. HDT is a short test under a stated load. Continuous service depends on stress, time, geometry and environment. We help interpret the values for the actual component.

Is the flame rating the same as finished-part approval?

The TDS reports UL 94 V-0 at 1.5 mm. That supports grade selection; any required approval of the printed component or installation is a separate project requirement.

Upload your CAD and get a quote, or talk to our team about the application.