Grey SLS PA12 manifold with three open ports and reinforcing ribs.

PA12

Make complex working parts in Formlabs PA12 nylon. Our in-house SLS service produces custom housings, brackets, clips and ducts without attached support structures, from first prototypes to repeat batches.

✓
Complex shapes without attached supports
✓
Durable working nylon parts
✓
Custom housings, clips and brackets
✓
Prototypes and repeat batches
Technology

SLS

Post-processing
Tapping (internal threads)
Heat-set threaded inserts
Colours

Formlabs

Material overview

Turn complex geometry into a working nylon part. We print Formlabs Nylon 12 Powder V1 in-house using SLS for custom housings, brackets, clips and production components.

Why choose PA12?

The powder bed supports the part during printing, so intricate shapes do not need attached support structures. Build mounting details, reinforcing ribs and cable guides into one component instead of assembling several separate pieces.

We handle build preparation, powder removal and the agreed finishing. For hollow parts, that includes planning access to clean the internal passages.

Typical applications

Housings and ducts

Fit openings, mounting points and shaped passages around your equipment.

Clips, brackets and guides

Combine locating and mounting features in one part. We help plan a first sample when a clip needs to flex during installation.

Fixtures and repeat components

Make custom nylon supports, guides and equipment parts for your production workflow.

Dark-grey PA12 sensor holder with an organic ribbed base and a split clamp, secured by two vertical bolts and nuts beneath the lower lugs.

Build the holder around the equipment.

The illustrated sensor holder combines a curved seat, branching ribs, mounting feet and cable clips. An upper clamp holds the sensor; two bolts pass through matching lugs into nuts seated underneath, leaving the lens clear.

Best suited to

Complex working nylon parts where integrated features and freedom from attached supports are useful.

What to consider

Hollow regions still need powder-removal access. Matte texture and critical sliding or sealing surfaces need to be considered in the fit.

Make the first sample useful

Leave access to the clamp bolts and retaining nuts. Check the cable path, lens clearance and mounting feet with the actual equipment.

Complex inside. Practical to finish.

This longitudinal half-section removes the front half of the manifold to expose one continuous passage joining all three ports. The complete part has closed walls around that passage. External ribs add structure without filling the space around the branches.

Clean the internal passages

We plan access for powder removal before printing, including enclosed areas and narrow channels.

Add the connections you need

Tapped threads and heat-set inserts are available for suitable designs. We help choose around the space for the fixing and how often the assembly will be opened.

Plan around a matte surface

SLS PA12 has a fine, grainy texture. For sliding connections or sealing faces, we agree the finish and checks with you. The cutaway is an application concept, not a tested pressure component.

Longitudinal half-section of a dark grey PA12 three-port manifold, exposing a continuous Y-shaped passage and lighter cut faces.

Order your PA12 part.

Send the design and quantity

Upload the model and mating dimensions. Mark internal passages, clamp fits and threaded connections, and identify where powder removal or surface finish is critical. No usable CAD yet? Send a drawing or photo to discuss the next step.

Compare price and plan delivery

Price depends on the part’s size and geometry, quantity and selected finishing. Compare the available options online; for a custom requirement, we review the design with you. Tell us when you need the parts. We confirm timing once the design and production requirements are clear.

Choose the finish and fit

We remove loose powder after printing. The standard surface is matte and grainy; tapped threads and heat-set inserts are available for suitable designs. Colours shown on this page identify the available choices; select your preference when quoting. For a close fit, tell us what the part connects to so we can agree important dimensions and any finishing before production.

Start with one part or order a batch. We make it in-house using SLS printing, and keep the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: Formlabs Nylon 12 Powder V1 technical data, revision 01 (19 August 2020), linked above. Fuse 1 specimens were conditioned for seven days at 23 °C and 50% relative humidity. Heat-deflection results are test values, not continuous operating temperatures.

Tensile strength

50 MPa (ASTM D638 Type 1)

Tensile modulus

1850 MPa (ASTM D638 Type 1)

Elongation at break

11% X/Y; 6% Z (ASTM D638 Type 1)

Heat deflection temperature

87 °C at 1.8 MPa; 171 °C at 0.45 MPa (ASTM D648)

Compare PA12 with other materials

Compare PA12-CF10 when a stiff reinforced FDM body is needed. Choose TPU for a compressible contact interface, or FDM when its material range and larger-part options suit the design.

PA12 or an FDM material?

PA12 suits complex nylon geometry without attached supports. FDM printing offers a broader choice of polymers, colours and larger-part options. We can help choose the process around your design, finish and quantity.

PA12 or carbon-fibre reinforced nylon?

Compare PA12-CF10 when stiffness is a priority. It is a different, reinforced FDM grade with its own print-direction and surface characteristics, rather than a direct substitute for SLS PA12.

PA12 or flexible TPU?

Choose TPU95A for a part intended to bend, compress or form a soft contact interface. PA12 can make flexible features such as clips through geometry, but it serves a different role from an elastomer.

PA12 SLS 3D printing questions

Which PA12 material do you use?

We use Formlabs Nylon 12 Powder V1 for the PA12 service described here.

Does SLS need supports?

The surrounding powder supports the part, so there are no attached supports to remove. Our team cleans away loose powder after printing and reviews access to hollow areas during preparation.

Can PA12 make clips and snap fits?

Yes. The shape controls how these features bend and hold. We can start with a sample so you can try the installation before ordering a batch.

Can you print a watertight PA12 part?

Sealing needs a design and finishing approach suited to the fluid and pressure. Tell us about the application so we can discuss suitability and the checks needed; standard SLS printing alone does not guarantee a leak-tight part.