Charcoal PA6-CF20 FDM tooling cradle with two shaped seats, an end stop, reinforcing ribs and open mounting holes.

PA6-CF20

Print stiff production fixtures, reinforced brackets and technical tooling in Polymaker Fiberon PA6-CF20. We help plan the carbon-fibre nylon around the load, moisture conditions and final assembly.

✓
20% carbon-fibre reinforcement
✓
Stiff tooling and fixtures
✓
Custom equipment brackets
✓
Build and conditioning guidance
Technology

FDM

Colours

Polymaker

Material overview

Fiberon PA6-CF20 is PA6 nylon reinforced with 20% carbon fibre. It is a material to compare for stiff fixtures, locating tools and equipment brackets where reinforcement helps the component hold its shape under load.

Why choose PA6-CF20?

PA6 absorbs moisture, which changes stiffness, toughness and dimensions. We consider the working environment alongside the dry data, plan the build and any agreed annealing, and check the important fit in a representative part.

Typical applications

Production tooling

Create custom seats, stops and guides around a workpiece.

Reinforced brackets

Connect equipment with a stiff body and supported mounting features.

Assembly fixtures

Make a locating tool that can be revised and reproduced from the accepted CAD.

Charcoal fibre-reinforced polymer locating fixture supporting a stepped metal workpiece in shaped seats, with an end stop and open mounting holes.

Make a fixture that follows the workpiece.

A shaped nest can position a component for assembly, inspection or handling. The illustrated fixture combines contact seats, an end stop and mounting holes in one printed body, leaving the workpiece accessible.

Locate the features that matter

Build the contact surfaces around the part being held, with clearance for loading and removal.

Add stiffness where it helps

Ribs and a supported base can reduce unwanted movement without filling every space with material.

Fit your workflow

Include access for tools and inspection. If the operation applies cutting or clamping forces, we review the retention method separately.

PA6-CF20 brings a stiff material starting point to the fixture; conditioning and orientation help make that stiffness useful in the actual workshop.

Material stiffness starts with a sensible structure.

The bracket comparison shows how supporting ribs change the way a corner carries load. Fibre reinforcement helps the material resist deformation, but it does not replace a well-supported shape.

Match the build to the load

We plan print orientation around the forces at the mounting points. Strength across layers differs from strength along the printed paths.

Protect contact and fixing areas

Leave useful material around holes and spread clamping pressure where needed. A fibre-filled surface may mark a delicate workpiece; a replaceable contact pad can help.

Plan heat treatment and fit together

If annealing is part of the agreed process, we consider its effect on dimensions before final fit checks. The first fixture establishes the reference for repeat orders.

Explore the Printing Guide →

Two charcoal FDM brackets showing an unreinforced corner and the same bracket with supporting ribs and accessible mounting holes.

Order your Fiberon PA6-CF20 part.

Send the design and quantity

Upload your CAD file and choose the material and quantity. Add a drawing or note for important dimensions, connections and visible surfaces. If you are still choosing a grade, our team can help before you order.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online; we review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Contact us to confirm the available colour and finishing options for this grade. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: Fiberon PA6-CF20 manufacturer technical data. Polymaker PA6-CF20 specimens were annealed at 100°C for 16 hours. Dry and wet results are reported separately and should remain tied to their conditioning and print direction. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

X–Y: 109.3 ± 2.4 MPa; Z: 54.0 ± 5.2 MPa — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Tensile modulus

X–Y: 8636.5 ± 211.4 MPa; Z: 3759.5 ± 118.5 MPa — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Elongation at break

X–Y: 2.1 ± 0.2%; Z: 1.9 ± 0.4% — ISO 527 / GB/T 1040; dry; annealed 100°C / 16 h

Heat deflection temperature

173°C at 1.8 MPa; 215°C at 0.45 MPa — ISO 75; annealed 100°C / 16 h

Density

1.17 g/cm³ at 23°C — ISO 1183 / GB/T 1033; material density

Material performance and test data

  • Flame classification: UL 94 HB at 1.5 mm.
  • Surface resistivity: >10¹² Ω (OL), ANSI ESD S11.11.
  • Test condition: specimens annealed at 100°C for 16 hours; dry and wet results are reported separately.

Compare PA6-CF20 with other materials.

Choose around what the component needs to do. These alternatives offer different starting points; our team can help narrow the choice.

PA12-CF10

For reinforced nylon with lower moisture sensitivity.

PA6-GF25

Compare glass-fibre reinforcement in a PA6 grade.

PPA-CF

For a different reinforced polyamide family.

Fiberon PA6-CF20 3D printing questions.

Why are dry and wet properties different?

PA6 takes up moisture from its environment. This can reduce stiffness and change dimensions while affecting toughness. We compare the condition relevant to your installation, not only the highest dry value.

Are the listed heat values for an ordinary as-printed part?

The linked data uses specimens annealed at 100°C for 16 hours. We agree the production condition and account for heat-treatment effects before final fit checks.

Can I choose colours and finishing online?

The currently available choices depend on the configured material options. If the option you need is not shown, contact us so we can confirm it for your part before ordering.

Can I order one part and repeat it later?

Yes. Start with a single component or a batch. Once the design, material and production setup are accepted, we retain the agreed details to make the next order easier.

Upload your CAD and get a quote, or talk to our team about the application.