PPS-GF20 Fiberon™ material render of Thermal probe guide flange, showing the printed surface and component geometry.

PPS-GF20

Make rigid equipment carriers, electrical supports and heat-exposed components in Polymaker Fiberon PPS-GF20. We print this glass-fibre-reinforced PPS grade in-house and help plan the heat treatment and final assembly.

✓
20% glass-fibre reinforcement
✓
Rigid heat-resistant components
✓
Electrical-insulation properties
✓
Chemical-resistant PPS base
Technology

FDM

Post-processing
Heat-set threaded inserts
Support removal
Colours

Polymaker

Material overview

Fiberon PPS-GF20 combines PPS with 20% glass fibre for stiff technical components. It is useful to compare for equipment carriers, supports and fixtures where heat, chemical contact and electrical properties matter together.

Why choose PPS-GF20?

The manufacturer publishes mechanical, thermal and flame data for the grade. We plan the build and agreed annealing around those requirements and the component’s fit. An insulating material is a starting point for electrical design, not a rating for the complete assembly.

Typical applications

Connector and component carriers

Organise mounting seats and cable routes in a rigid support.

Heat-exposed fixtures

Locate equipment components where the thermal environment is demanding.

Technical brackets

Combine supporting ribs and attachment features in a custom PPS part.

Light-grey PPS-GF20 connector carrier with separate compartments, rounded cable-routing openings and accessible mounting bosses.

Arrange the components and their service access.

The illustrated carrier brings connector seats, compartments and cable routes into one rigid component. PPS-GF20 is a candidate when that assembly also faces demanding heat, chemical contact or electrical-insulation requirements.

Best suited to

Stiff technical carriers and supports with a defined thermal, chemical or electrical brief.

What to consider

Material insulation data does not establish the rating of the complete electrical assembly. Required clearances remain part of its design.

Make the first sample useful

Position components around the chosen hardware and leave a removal path for connectors. Agree the dimensions to check after any annealing.

Support the assembly without filling every space.

The cutaway reveals partitions, underside pockets and supported mounting bosses. These features can make a carrier more useful while keeping the geometry practical to print.

Plan the heat treatment

The published mechanical and thermal values use annealed specimens. We agree the material condition and allow for dimensional changes before checking the final fit.

Keep fixings supported

Ribs connect bosses to the surrounding structure. We review the available material around inserts and clamped areas.

Keep electrical requirements explicit

Insulating material does not by itself establish safe spacing, a voltage rating or ESD protection for an assembly. Our team can review the material data with your equipment requirements.

Explore the Printing Guide →

Sectional CAD view of a light-grey PPS-GF20 component tray showing partitions, cable channels, underside pockets and supported bosses.

Order your Fiberon PPS-GF20 part.

Send the design and quantity

Send the connector layout, mounting drawing and electrical requirements. Identify cable routes, separation distances and dimensions critical to assembly. No usable CAD yet? Send a drawing or photo to discuss the next step.

Compare price and plan delivery

Price depends on the size and geometry, quantity and selected finishing. Compare the available options online and tell us when you need the parts. We review custom requirements with you and confirm timing once the production brief is clear.

Agree the finish and fit

Available options include heat-set threaded inserts, where the design allows. Printed parts retain a layer pattern. We plan important fits and visible surfaces around the build, and discuss further finishing where needed. Choose from the colours shown for this material when quoting.

Start with one part or a batch. We make the components in-house using FDM and retain the agreed production details for repeat orders.

Upload CAD & get a quote →   Discuss your part →

Technical properties

Manufacturer test data helps compare grades. Printed-part performance also depends on the design and print direction. Our team can help interpret the values for your application.

Source: Fiberon PPS-GF20 manufacturer technical data. Polymaker PPS-GF20 mechanical and thermal results use specimens annealed at 130°C for 10 hours. UL 94 V-0 is reported at 1.5 mm. Electrical-insulation data must not be relabelled as ESD protection. Heat-deflection temperature is a test under a stated load, not a continuous service-temperature rating. We help interpret the values for your component.

Tensile strength

X–Y: 64.1 ± 2.1 MPa; Z: 22.9 ± 0.8 MPa — ISO 527 / GB/T 1040; annealed 130°C / 10 h

Tensile modulus

X–Y: 4552.0 ± 54.6 MPa; Z: 2557.2 ± 101.2 MPa — ISO 527 / GB/T 1040; annealed 130°C / 10 h

Elongation at break

X–Y: 2.0 ± 0.2%; Z: 1.1 ± 0.1% — ISO 527 / GB/T 1040; annealed 130°C / 10 h

Heat deflection temperature

125.8°C at 1.8 MPa; 236.3°C at 0.45 MPa — ISO 75; annealed 130°C / 10 h

Density

1.36 g/cm³ at 23°C — ISO 1183 / GB/T 1033; material density

Material performance and test data

  • Flame rating: UL 94 V-0 at 1.5 mm.
  • Electrical insulation: reported by the manufacturer; surface resistivity >10¹² Ω (OL), ANSI ESD S11.11.
  • Chemical resistance: reported by the manufacturer.
  • Test condition: specimens annealed at 130°C for 10 hours. Higher annealing temperature changes the HDT results.

Compare PPS-GF20 with other materials.

Compare PPS-CF10 for carbon reinforcement without assuming the same electrical behaviour. Consider unfilled PEI 1010 when its data and geometry suit the job.

PPS-CF10

Compare carbon reinforcement in a PPS grade.

PA6-GF25

For glass-reinforced nylon under a different moisture and thermal profile.

PEI 1010

For an unfilled specialist polymer with electrical and thermal data.

Fiberon PPS-GF20 3D printing questions.

Is PPS-GF20 ESD-safe?

The grade’s insulating behaviour is different from static-dissipative protection. The TDS reports surface resistivity above 10¹² ohms; that does not establish an ESD-safe component.

Are the published heat values for an annealed part?

Yes, the results shown use specimens annealed at 130°C for 10 hours. The manufacturer also shows that higher annealing temperatures change HDT results. We agree the relevant condition and final dimensional checks.

Does UL 94 V-0 approve the complete housing?

No. The TDS reports V-0 at 1.5 mm for the stated test. The complete housing still has its own geometry, assembly and project requirements.

Upload your CAD and get a quote, or talk to our team about the application.